TK DIN/ISO Tool Changer

  • The double check vlave is attached externally at the gripping modules.

    • To prevent leakage in case of pressure loss in pneumatic grippers
    • To avoid a loss of workpiece in case of pressure loss


ISO Robot Tool Change Adapter.
The Tool Changer has been designed and built to meet the most stringent specifications of automobile manufacturers. The Tool Changer features a high number of Air Ports, Electric Contacts (12 or 24 pins), and Hydraulic and Water Ports for the Welding Gun Tool Changer.Fast & problem-free changing from tools and grippers at robots & gantries up to a payload of 1000 kg. Transmission of electrical signals by spring fitted contact pins. Coupling & uncoupling of pneumatic & hydraulic lines.

The Robot Side has an ISO mounting pattern to fit the Robot Flange directly, without an additional adapter plate. The locking mechanism, with cone and several hardened balls generates a high holding force and is failsafe due to the spring behind the Locking Cylinder. It compensates for misalignment at pick up by as much as 1/8”: once the Robot Side is about 1/8” distance to the Tool Side firing the Locking Mechanism will pull up the Tool and lock it, thus allowing for faster cycle times.
Specific splash-proof execution, IP65 sealed electrical signal transmission, tool changer with internal routing,stainless steel tool changer for pharmaceutical, medical or food industry.



TK Series Tool Changer :
TK-40, TK-50,TK-63, TK-80, TK-125, TK-160, TK- 200-R, TK-200 R-SV, TK-200T,
TK-300-Alu-R, TK-300 R-SV, TK-300-Alu-T, TK-300-ST-R, TK-300-ST-R-SV,

    Etiam magna arcu, ullamcorper ut pulvinar et, ornare sit amet ligula. Aliquam vitae bibendum lorem. Cras id dui lectus. Pellentesque nec felis tristique urna lacinia sollicitudin ac ac ex. Maecenas mattis faucibus condimentum. Curabitur imperdiet felis at est posuere bibendum. Sed quis nulla tellus.


    63739 street lorem ipsum City, Country


    +12 (0) 345 678 9